Audrey and Harry Hawthorn Library and Archives

A break from carving

92-1-a034532
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Doug Cranmer taking a break from carving. He sits on a wooden stool with his chain saw at his feet.

A tree for a pole

92-1-a034507
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts a felled tree which will possibly become a totem pole.

Carving a partially finished totem pole

92-1-a034494
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts a man, possibly Douglas Cranmer, carving on a partially finished totem pole as a man and woman look on. Vintage cars are visible in the background.

Carving a pole

92-1-a034511
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts a pole that has been partially carved. A carver, probably Doug Cranmer, uses an adze.

Carving a pole

92-1-a034524
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Doug Cranmer carving a nearly completed pole. Visible figures include Thunderbird and Bear; this may be the St. Catherines, Ontario Centennial Confederation pole, carved in 1967.

Carving a pole

92-1-a034542
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts a carver, possibly Godfrey Hunt, carving on a totem pole. He is possibly using a file.

Carving a pole

92-1-a034540
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Doug Cranmer in the early stages of carving a totem pole.

Carving a pole with a chain saw

92-1-a034472
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Douglas Cranmer in the early stages of carving a totem pole. The pole is outside. He is preparing to use a chain saw to make the early cuts to a pole. Markings are visible, showing where he will cut.

Carving a pole, early stages

92-1-a034475
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Godfrey Hunt carving a totem pole. The pole is outside. He is using a knife to cut a pre-marked design on the pole.

Carving a totem pole

92-1-a034500
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Douglas Cranmer in the process of carving a pole. The early cuts are made with a chain saw.

Carving a totem pole

92-1-a034468
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Doug Cramner carving a totem pole.

Carving a totem pole

92-1-a034470
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Douglas Cranmer in the early stages of carving a totem pole. The pole is outside.

Carving a totem pole

92-1-a034643
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts a carver, possibly Douglas Cranmer, working inside on what may be a totem pole. The carving is still in the early stages and it is difficult to tell what will be depicted.

Carving a totem pole

92-1-a034471
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Douglas Cranmer in the early stages of carving a totem pole. The pole is outside. A chain saw is visible on the ground.

Carving break

92-1-a034509
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Doug Cranmer taking a break from carving. He sits on a wooden bench and his chain saw rests on the ground in front of him.

Carving the Saint Catherine totem pole

92-1-a034473
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts a man, probably Douglas Cranmer, in the early stages of carving the St. Catherines, Ontario totem pole. The pole is outside. He is preparing to use a chain saw to make the early cuts to a pole. Markings are visible, showing where he will cut.

Carving the St. Catherines pole, early stages

92-1-a034474
Item
[ca. 1964 - 1967]

Parte deVirginia Kehoe fonds

Image depicts Douglas Cranmer in the early stages of carving the St. Catherines totem pole. The pole is outside.. He is using an adze to make early cuts on a pole.