Imprimir vista previa Cerrar

Mostrando 2292 resultados

Archival description
Norman Tait Inglés
Imprimir vista previa Hierarchy Ver :

2277 resultados con objetos digitales Muestra los resultados con objetos digitales

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman starts to sketch on the log. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 45-47).

Notes:
Once the log is suitably rounded, Norman is eager to get the drawings on the pole. He brings in the tissue sketches he did for the bid submission, roughly sketching them onto the log. (Note the 5th image [a020808] shows my darkroom printing notations--often my photo choices are indicated with a wax pencil on the contact sheet—sometimes with an X, sometimes a triangle, sometimes a dot—depending on the job.)

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman starts to sketch on the log. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 45-47).

Notes:
Once the log is suitably rounded, Norman is eager to get the drawings on the pole. He brings in the tissue sketches he did for the bid submission, roughly sketching them onto the log. (Note the 5th image [a020808] shows my darkroom printing notations--often my photo choices are indicated with a wax pencil on the contact sheet—sometimes with an X, sometimes a triangle, sometimes a dot—depending on the job.)

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman starts to sketch on the log. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 45-47).

Notes:
Once the log is suitably rounded, Norman is eager to get the drawings on the pole. He brings in the tissue sketches he did for the bid submission, roughly sketching them onto the log. (Note the 5th image [a020808] shows my darkroom printing notations--often my photo choices are indicated with a wax pencil on the contact sheet—sometimes with an X, sometimes a triangle, sometimes a dot—depending on the job.)

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman starts to sketch on the log. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 45-47).

Notes:
Once the log is suitably rounded, Norman is eager to get the drawings on the pole. He brings in the tissue sketches he did for the bid submission, roughly sketching them onto the log. (Note the 5th image [a020808] shows my darkroom printing notations--often my photo choices are indicated with a wax pencil on the contact sheet—sometimes with an X, sometimes a triangle, sometimes a dot—depending on the job.)

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman starts to sketch on the log. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 45-47).

Notes:
Once the log is suitably rounded, Norman is eager to get the drawings on the pole. He brings in the tissue sketches he did for the bid submission, roughly sketching them onto the log. (Note the 5th image [a020808] shows my darkroom printing notations--often my photo choices are indicated with a wax pencil on the contact sheet—sometimes with an X, sometimes a triangle, sometimes a dot—depending on the job.)

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman making initial sketches on the log more definite, then doing first cuts. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 50-51.)
Notes:
Norman makes his initial rough sketches more definite and has crew members doing some tracing onto pole.
The work shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives).
There’s an immense change as cuts are started on other figures—it’s the end of “rounding the log” and the start of “roughing the pole” (meaning rough-cutting the pole).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman begins his first chain saw cuts into the pole (top figure). Chip immediately calls the rest of the crew to come watch and imitate everything Norman is doing. Norman making initial sketches on the log more definite, then doing first cuts. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 50-51.)
Notes:
Norman makes his initial rough sketches more definite and has crew members doing some tracing onto pole.
The work shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives).
There’s an immense change as cuts are started on other figures—it’s the end of “rounding the log” and the start of “roughing the pole” (meaning rough-cutting the pole).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman begins his first chain saw cuts into the pole (top figure). Chip immediately calls the rest of the crew to come watch and imitate everything Norman is doing. Norman making initial sketches on the log more definite, then doing first cuts. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 50-51.)
Notes:
Norman makes his initial rough sketches more definite and has crew members doing some tracing onto pole.
The work shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives).
There’s an immense change as cuts are started on other figures—it’s the end of “rounding the log” and the start of “roughing the pole” (meaning rough-cutting the pole).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman begins his first chain saw cuts into the pole (top figure). Chip immediately calls the rest of the crew to come watch and imitate everything Norman is doing. Norman making initial sketches on the log more definite, then doing first cuts. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 50-51.)
Notes:
Norman makes his initial rough sketches more definite and has crew members doing some tracing onto pole.
The work shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives).
There’s an immense change as cuts are started on other figures—it’s the end of “rounding the log” and the start of “roughing the pole” (meaning rough-cutting the pole).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman has given ax and then chain saw to brother Chip and told him to “match it”—in other words, do what I just did. This matching process is a very common teaching technique on the Northwest Coast. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 50-51.)
Notes:
Norman makes his initial rough sketches more definite and has crew members doing some tracing onto pole.
The work shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives).
There’s an immense change as cuts are started on other figures—it’s the end of “rounding the log” and the start of “roughing the pole” (meaning rough-cutting the pole).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman has given ax and then chain saw to brother Chip and told him to “match it”—in other words, do what I just did. This matching process is a very common teaching technique on the Northwest Coast. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 50-51.)
Notes:
Norman makes his initial rough sketches more definite and has crew members doing some tracing onto pole.
The work shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives).
There’s an immense change as cuts are started on other figures—it’s the end of “rounding the log” and the start of “roughing the pole” (meaning rough-cutting the pole).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman has given ax and then chain saw to brother Chip and told him to “match it”—in other words, do what I just did. This matching process is a very common teaching technique on the Northwest Coast. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 50-51.)
Notes:
Norman makes his initial rough sketches more definite and has crew members doing some tracing onto pole.
The work shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives).
There’s an immense change as cuts are started on other figures—it’s the end of “rounding the log” and the start of “roughing the pole” (meaning rough-cutting the pole).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).

Geographic Location: UBC Carving Shed

Crew and log at the old UBC carving shed

Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).

Geographic Location: UBC Carving Shed

Resultados 61 a 80 de 2292