Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman has given ax and then chain saw to brother Chip and told him to “match it”—in other words, do what I just did. This matching process is a very common teaching technique on the Northwest Coast. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 50-51.) Notes: Norman makes his initial rough sketches more definite and has crew members doing some tracing onto pole. The work shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives). There’s an immense change as cuts are started on other figures—it’s the end of “rounding the log” and the start of “roughing the pole” (meaning rough-cutting the pole).
Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman has given ax and then chain saw to brother Chip and told him to “match it”—in other words, do what I just did. This matching process is a very common teaching technique on the Northwest Coast. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 50-51.) Notes: Norman makes his initial rough sketches more definite and has crew members doing some tracing onto pole. The work shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives). There’s an immense change as cuts are started on other figures—it’s the end of “rounding the log” and the start of “roughing the pole” (meaning rough-cutting the pole).
Item is a b&w negative of a photograph of the continuation of the work on the pole. Norman has given ax and then chain saw to brother Chip and told him to “match it”—in other words, do what I just did. This matching process is a very common teaching technique on the Northwest Coast. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING p. 50-51.) Notes: Norman makes his initial rough sketches more definite and has crew members doing some tracing onto pole. The work shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives). There’s an immense change as cuts are started on other figures—it’s the end of “rounding the log” and the start of “roughing the pole” (meaning rough-cutting the pole).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph of the continuation of the work on the pole. The photograph shows this second stage of doing rough cuts on the totem pole: getting the design on, plugging any damaged areas, making the first cuts, cutting all the figures, designing and cutting any add-on pieces, making the background uniform. This stage is hard manual labour, with the carvers using bigger adzes just to clear away a lot of wood. It should be noted that there’s no really easy delineation between these stages (Stage One = Rounding the pole; Stage Two = Roughing the pole) because some figures are worked ahead of others. But the change is signaled by switching from heavier tools (2-handed adzes and mallets) to smaller ones (single-handed adzes and curved knives. The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING).
Item is a b&w negative of a photograph documenting the final stage of log preparation for the creation of the Native Education Centre pole by Norman Tait and crew. The apprentices are working on making their finishing tools—small single-handed adzes and an assortment of curved knives. The finishing stage was jokingly referred to as “going to the dentist” because most of the figures were getting their teeth worked on. This means that the faces have already been roughed out and sculpted; now the carvers are using their knives to cut teeth, outline nostrils and eyelids, etc. This stage also includes raising the pole; while Norman and crew do the physical part of pulling up the pole, hosting the pole raising (which means proper ceremony and gift-giving) is the responsibility of the owner of the pole (in this case, the Native Education Centre who made t-shirts for the event and handed out fruit afterwards).The textual info is in WHERE THE PEOPLE GATHER or paperback TOTEM POLE CARVING
